1.输送能力大，高效的输送机允许在较小空间内输送大量物料，输送能力6m³/h~600m³/h。 1. Large delivery capacity, efficient conveyors allow large quantities of materials to be transported in smaller Spaces, conveying capacity 6m cubed/h ~ 600m cubed/h. 2.输送能耗低，借助物料的内摩擦力，变推动物料为拉动，使其与螺旋输送机相比节电50%。 2. Low energy consumption, with the help of the internal friction of materials, the change of the material is pulled, and the power saving is 50% compared with the spiral conveyor. 3.密封和安全，全密封的机壳使粉尘无缝可钻，操作安全，运行可靠。 3. Seal and safety, the fully sealed shell makes the dust seamless, safe operation and reliable operation. 4.使用寿命长，用合金钢材经先进的热处理手段加工而成的输送链，其正常寿命>5年，链上的滚子寿命（根据不同物料）≥2~3年。 4. Long service life, with the advanced heat treatment method of alloy steel, the normal life of > is 5 years, and the life of roller life on the chain (according to different materials) is greater than 2 ~ 3 years. 5.工艺布置灵活，可高架、地面或地坑布置，可水平或爬坡（≤15°）安装，也可同机水平加爬坡安装，可多点进出料。 5. Flexible process arrangement, can be elevated, ground or pit to decorate, can be installed in horizontal or climbing (15 ° or less), also can add the same level grade installation, can be more in and out of the material. 6.使用费用低，节电且耐用，维修少，费用低（约为螺旋机的1/10），能确保主机的正常运转，以增加产出、降低消耗、提高效益。 6. Low cost, power saving and durability, low maintenance, low cost (about 1/10 of the screw machine), can ensure the normal operation of the main engine to increase output, reduce consumption and improve efficiency. 7.系列齐全，FU系列有FU150.FU200.FU270.FU50.FU410.FU500.FU600和FU700等各种型号，并均可提供两种型式的双向输送。 Series 7 series is complete, the FU have FU150, FU200. FU270. FU50. FU410. FU500. FU600 and FU700 etc. Various models, and can provide two types of two-way transmission.