斗式提升机利用均匀固接于无端牵引构件上的一系列料斗，竖向斗式提升机具有输送量大，提升高度高，运行平稳可靠，寿命长显著优点，其主要性能及参数符合JB3926----85《垂直斗式提升机》（该标准等效参照了国际标准和国外先进标准），牵引圆环链符合MT36----80《矿用高强度圆环链》,本提升机适于输送粉状，粒状及小块状的无磨琢性及磨琢性小的物料，如：煤、水泥、石块、砂、粘土、矿石等，由于提升机的牵引机构是环行链条，因此允许输送温度较高的材料(物料温度不超过250 ℃)。一般输送高度最高可达40米。
Bucket elevator uses a series of hoppers fixed evenly on endless traction components. Vertical bucket elevator has the advantages of large conveying capacity, high lifting height, stable and reliable operation and long service life. Its main performance and parameters conform to JB3926-85 "Vertical bucket elevator" (which equivalent refers to international standards and advanced foreign standards), and the traction ring chain conforms to MT36-80. "High Strength Ring Chain for Mine Use". This hoist is suitable for conveying powdery, granular and small pieces of non-polishing and small-polishing materials, such as coal, cement, stone, sand, clay, ore, etc. Because the hoist's traction mechanism is a circular chain, it is allowed to convey materials with higher temperature (material temperature does not exceed 250 C). The conveying height can reach up to 40 meters.
斗式提升机工作原理：斗式提升机结构简单、运行平稳，掏取式装料，混合式或重力卸料，斗式提升机轮缘采用组合链轮，更换方便，链轮轮缘经特殊处理寿命长，下部如采用重力自动张紧装置，能保持恒定的张力，避免打滑或脱链，同时在料斗遇阻时，有一定的容让性能够有效地保护运动部件，物料温度不超过250 ℃。
The working principle of bucket elevator: bucket elevator has simple structure, smooth operation, withdrawal loading, mixed or gravity unloading, bucket elevator wheel rim adopts combined sprocket, chanraomo.37ix.com.cnchanraomope.37ix.com.cnbaozhuangsl.37ix.com.cnwhich is convenient to mojuls.37ix.com.cnmojusg.37ix.com.cnshousuomo.37ix.com.cnreplace, and Sprocket Rim has long service life after special treatment. If gravity automatic tensioning device is used in lower part, it can maintain constant tension, avoid skidding or chain-breaking, and at the same time, when the hopper encounters resistance, it has a certain degree. Tolerance can effectively protect moving parts, material temperature does not exceed 250 C.