1、给输送机上料的时候,物料的量一定要不大于技术规格里规定的输送能力，否则会损坏链条，链条齿，还有所有的传动部位。
1. When feeding the conveyor, the amount of material must not be greater than the conveying capacity specified in the technical specifications, otherwise the chain, the chain teeth and all the transmission parts will be damaged.
2、需时不时地检查链条的张力和长度，如果电机保险丝切断机器的话,只有检测过设备运行异常的原因, 问题完全解决之后, 才能重启设备..
2. Check the tension and length of the chain from time to time. If the motor fuse cuts off the machine, the equipment can be restarted only after the cause of abnormal operation of the equipment has been detected and the problem has been completely solved.
3、先让设备空转,然后关掉。
3. Let the equipment idle first, then turn it off.
4、只有在存在安全问题的时候才能使用应急开关,所以不要在日常的操作过程中使用. 使用应急开关之后要找出问题的所在并加以解决,然后才能重新运行设备, 如果要满载输送机时,你要手动清扫输送机.
4. Emergency switch can only be used when there are safety problems, so don't use it in daily operation. After using emergency switch, find out the problem and solve it, then re-run the equipment. If you want to load the conveyor, you need to clean the conveyor manually.