链条的安装。它的内部主要是由链条拉着碟片带动物料向前匀速前进，所以链条的安装对于管链输送机的正常使用有着至关重要的作用。
Installation of chain. Its interior is mainly pulled by the chain and the animal material is moving forward evenly at the same time, so the installation of the chain plays a vital role in the normal use of the chain conveyor.
1.安装时应再次检查链条是否转动灵活。只有转动灵活的链条方可进行安装。
1. Installation should check again whether the chain is flexible. Only flexible chains can be installed.
2.装入链条前应先将所有观察盖、头部和尾部的端盖板、弯曲段的下盖板打开，尾轮调到拉紧行程的起端，判明链条的运行方向，准备好链条需要的数量，并应配有少量备件。
2. Before loading the chain, all the observation caps, the end caps of the head and tail, and the lower caps of the bending section should be opened. The tail should be rotated to the beginning of the stretching journey, the running direction of the chain should be determined, the quantity of the chain needed should be prepared, and a small number of spare parts should be provided.
3.组装链条时，应根据管链输送机的机型、长度、和安装现场的具体条件，确定安装办法和相应措施。
3. When assembling the chain, the installation method and corresponding measures should be determined according to the type, length of the pipe chain conveyor and the specific conditions of the installation site.
4. 链条安装后，应调整拉紧装置，保持链条有适当的松紧度，不宜太紧或太松。如发现太紧或太松，应在最后接头处，加入或卸下1-2节链条，而后再次进行调整。
4. After the chain is installed, the tension device should be adjusted to keep the chain with proper tightness, not too tight or too loose. If it is found too tight or too loose, 1-2 chains should be added or removed at the last joint, and then adjusted again.
了解了链条的安装后，对于管链输送机在正常运行中出现的小问题也能找到解决的办法 ，还可以大大提高运行的效率。
Understanding the installation of the chain, for the pipe chain conveyor in the normal operation of small problems can also find solutions, but also greatly improve the efficiency of operation.